How to install stone cladding

 How to install stone cladding

Learning how to Install stone cladding is a great way to give your home or building a natural and rustic look. It can be done on both interior and exterior walls, and can add value to your property. Here are some steps to follow when installing stone cladding:

You need to determine what style of lay you are going to adopt. Tight laid or with a grout line.

Here is the difference between the 2 :

Loose laid - with grout line

Tends to be easier to lay as there is less shaping to do, gives you a more traditional look


Tight Laid - no grout line

Harder to lay with more work involved in shaping,  gives you a more modern look


Here are the steps on how to install stone wall cladding:

  • Measure the area: Measure the area where you want to install the stone cladding. This will help you to determine the amount of materials you need to purchase.
  • Choose the stone: There are many types of stone available for cladding, including slate, granite, sandstone and limestone. Choose the one that suits your style and budget.
  • Prepare the surface: The surface where you will install the stone must be clean, dry and free from any loose material. You may need to use a wire brush or pressure washer to clean the surface.
  • Always use a good quality polymer modifies tile adhesive, there are many brands to choose from.
  • Apply the adhesive: Apply a layer of adhesive to the surface using a trowel. The adhesive should be spread evenly.
  • Install the stone: Start at the bottom of the wall and work your way up, placing each stone on the adhesive and pressing it firmly into place. Use spacers to maintain a consistent gap between the stones.
  • Cut the stone: You may need to cut some stones to fit around corners or other obstacles. Use a wet saw or cold chisel to cut the stone to the desired shape. Ensure you always thee appropriate PPE when cutting stone
  • Grout the gaps if a grout line is how : Once all the stones are in place, fill the gaps between them with grout. Use a grout float to spread the grout evenly, and wipe away any excess with a damp sponge.
  • Seal the stone: Finally, apply a good quality impregnating stone sealer to the natural stone to protect it from moisture and stains.

With these steps, you should be able to successfully install stone cladding on your walls and add that hero to your project. Remember to work carefully and take your time to ensure that the end result is both beautiful and durable.

For more information about how to install stone cladding visit Haus Collective to chat to our highly knowledgeable team.


Comments